Speedparts.biz Logo Speedparts.biz Logo Speedparts.biz Logo Speedparts.biz Logo Speedparts.biz Logo Speedparts.biz Logo


OFFICIAL 2015 DEALER:

NEO
ROCKET BUNNY SARTO RACING BMW E36
Rocket Bunny Distributor
Canton Racing Distributor
Braille Battery Distributor
RAYS ENGINEERING VOLK RACING DEALER
The listed shipping rate only applies to the lower 48 contiguous states. Additional shipping may be charged for shipping outside the United States. No returns on special order products. Returns on products that are eligible for return will be subject to an additonal 30% restocking fee plus shipping.
CALL 502.553.7822 TO PLACE AN ORDER
 
JDM SWAPS:
      44 results found for JDM SWAP  
        PART#
Product Pic
$195.00
 TOYOTA SUPRA 2JZ ALUMINUM PULLEY SET

Includes the 3 pulley set Alternator, Power Steering, and Water Pump. This Pulley set is a must when upgrading to the US Spec Water Pump. Works with 1JZ and 2JZ motors with or without AC.

 21101719
     
Product Pic
$32.00
 2JZ PILOT BEARING

Pilot bearing for 1JZ, 2JZ, 7M, 22R and even 1UZ engines. This should be replaced when doing any clutch job.

 21104910
     
Product Pic
OPTIONS
$395.00
 ALUMINUM DRIVESHAFT FOR NISSAN 240 SR20 ENGINE

This Aluminum Driveshaft fits 240sx S Chassis with SR20 engine. Perfect for Drift and Race Application. Fits Nissan S13 or Nissan S14, with ABS option available.
 22101112
     
Product Pic
OPTIONS
$350.00
 STAINLESS STEEL DRIVESHAFT FOR NISSAN 240 SR20 ENGINE

This Stainless Steel Driveshaft fits 240sx S Chassis with SR20 engine. Fits Nissan S13 or Nissan S14, with ABS option available.
 22101113
     
Product Pic
OPTIONS
$395.00
 ALUMINUM DRIVESHAFT FOR NISSAN 240 KA ENGINE

This Aluminum Driveshaft fits 240sx S Chassis with KA engine. Perfect for Drift and Race Application. Fits Nissan S13 or Nissan S14, with ABS option available.
 22101114
     
Product Pic
OPTIONS
$350.00
 STAINLESS STEEL DRIVESHAFT FOR NISSAN 240 KA ENGINE

This Stainless Steel Driveshaft fits 240sx S Chassis with KA engine. Fits Nissan S13 or Nissan S14, with ABS option available.
 22101115
     
Product Pic
OPTIONS
$398.99
 ALUMINUM DRIVESHAFT NISSAN 240SX SR20

This Speedmaster one piece Aluminum Driveshaft for Nissan 240SX S13 S14 SR20 replaces the stock two piece driveshaft.
Order the Steel driveshaft for drifting and the Aluminum for drag and circuit racing.
 
FEATURES
•Direct Bolt in replacement. No modifications necessary
•3" Diameter Tubing. 6061-T6 Aluminum
•1310 series replaceable, high performance, American made ujoints
•High Speed Balanced as a complete assembly with rear flange and trans yoke attached before balancing

 22101116
     
Product Pic
OPTIONS
$352.99
 STEEL DRIVESHAFT NISSAN 240SX SR20

This Speedmaster one piece Steel Driveshaft for Nissan 240SX S13 S14 SR20 replaces the stock two piece driveshaft.
Order the Steel driveshaft for drifting and the Aluminum for drag and circuit racing.
 
FEATURES
•Direct Bolt in replacement. No modifications necessary
•3" Diameter X .083" Wall Thickness Tubing
•1310 series replaceable, high performance, American made ujoints
•High Speed Balanced as a complete assembly with rear flange and trans yoke attached before balancing

 22101117
     
Product Pic
OPTIONS
$359.99
 2JZ ENGINE MOUNT KIT FOR S13 S14

This 2JZ Engine mount kit bolts directly into both S13 or S14 chassis to swap in the legendary 2JZ Twin Turbo Toyota Supra engine.
This kit includes pair of custom front engine mounts and custom transmission mount to bolt 2JZ Engine into an s chassis. Combined with our 2JZ into 240 Driveshaft you can turn your car into a V8 Hunting JDM Beast!
 

 22121715
     
Product Pic
OPTIONS
$390.00
 Driveshaft for 2JZ into Nissan 240 Engine Swap

This stainless steel driveshaft is exactly what you need for your Toyota Supra 2JZ into S Chassis Swap. Fits Nissan S13 or Nissan S14, with ABS option available.
We also offer the 2JZ Engine Mount Kit for Nissan 240 to accompany this item.
 22121112
     
Product Pic
OPTIONS
SILICON
CHASSIS
$1399.00
 CX RACING 2JZ-GTE ENGINE SWAP INTERCOOLER AND RADIATOR KIT FOR 240

This Easy to Install Kit from CX Racing Includes Intercooler, Piping, Downpipe, Catback, Radiator, and Fan Needed to Install a 2JZ-GTE 2JZ Engine into a Nissan 240SX S13 S14. Offers Excellent Performance Gains. One of the Best Kits on the Market, with High Quality Products and Affordable Pricing.
Take the headache out of installing the 2JZ-GTE motor of your dreams!
 
Intercooler: • Core Size: 24"x12"x3" • Overall Size: 31"x12"x3" • 3" Inlet & Outlet • 3" core, Bar and Plate Design • 100% Aluminum
 
Piping Kit: • Mandrel Bent Aluminum Pipe • 3" Cold Side Pipes • 2.5" Hot Side Pipes • Comes with BOV, Silicon Hoses, and T-Bolt Clamps • Built In MAF Sensor Flange, Fits Factory MAF Sensor.
 
Radiator:: • 100% Aluminum • Comes with Top 1.5" Water Pipe (Bottom uses Stock Hose, Not Included) • 2 12" Fans
 
Turbo Back Exhaust: • 3" Stainless Steel Pipe, All the Way from Turbo Elbow to Exhaust Tip • 4" Single Tip Muffler, Exits the Same as Stock on the Left Side
 
Turbo Intake Kit: • 3" Aluminum Intake Pipe • 3" Air Filter • Comes with MAF Flange, Fits Factory MAF Sensor
 22121719
     
Product Pic
OPTIONS
MODEL
$1550.00
 240SX S13 S14 2JZ SWAP KIT

This kit will allow you to drop in a 2JZGTE or a 1JZGTE into your Nissan S13 and S14 without having to modify your chassis. This kit locates the 2JZ engine as low and as far back as possible in the 240sx engine bay. The transmission shift knob will be located in the factory position as well. The only thing you will have to make is the wiring harness (Plug and Play conversion harness available). The Kit is $1,550.00 with a $200.00 core charge. Optional hold on drive shaft until core is received. Estimated 2 week wait on core completion.


 
FEATURES:
• Front Cross Member
• Transmission Cross Member
• Drive Shaft for a R154, 5-Speed Transmission
• CNC Laser Cut Motor Mount Brackets
• Shifter Extension
 22121720
     
Product Pic
MODEL
$45.00
 CUSTOM THROTTLE CABLE BRACKET FOR 240SX 2JZ SWAP

This Custom Throttle Cable Bracket for 240sx S13 S14 2JZ Swap lets you keep your cruise control option along with your stock throttle cable for your swap.

 22121721
     
Product Pic
MODEL
$100.00
 DOWN PIPE ADAPTER FOR NISSAN 240 2JZ SWAP

2JZ Swap Down Pipe Adapter for Nissan 240sx S13 S14 2JZ Swap.

 22121722
     
Product Pic
MODEL
$580.00
 NISSAN 240 ALUMINUM DRIVE SHAFT FOR 2JZ SWAP

Aluminum Drive Shaft for your Nissan 240sx S13 S14 2JZ Swap. Strong as steel 8 lbs lighter. Price shown is with kit purchases only. 5spd only, 6spd currently unavailable.

 22121113
     
Product Pic
MODEL
$120.00
 CLUTCH LINE KIT FOR NISSAN 240 2JZ SWAP

Stainless Steel Braided Clutch Line, that runs from your clutch master cylinder to the slave cylinder for your Nissan 240 S13 S14 2JZ Swap.

 22121723
     
Product Pic
OPTIONS
EXACT ENGINE MODEL
$699.00
 2JZ NISSAN 240SX WIRING HARNESS

This 2JZ Engine Wiring Harness fits s13 or s14 Nissan 240sx
Contact SPEEDPARTS.biz to fully customize your race harness with all options.
 22121717
     
Product Pic
HOSE COVER
$80.00
 POWER STEERING LINE FOR NISSAN 240SX 2JZDET ENGINE SWAP
This custom power steering line is made specifically for Nissan 240sx with 2JZdet engine swap.
A complete high pressure OEM replacement power steering hose assembly. These -6 stainless steel assemblies are offered with or without a black hytrel cover to protect the lines and enhance the look for no extra charge.
 22121718
     
Product Pic
$250.00
 ZL RB Engine Mount Kit for S13 S14

This universal engine mount kit bolts directly into both S13 or S14 chassis to swap in a RB25det or RB26det engine, the epic 6 Cylinder Turbo engine of the Nissan Skyline.
Combined with the RB into 240 Driveshaft we offer you can turn your car into a JDM beast V8 Hunter.
 22131716
     
Product Pic
OPTIONS
$350.00
 STAINLESS STEEL DRIVESHAFT FOR NISSAN 240 RB ENGINE SWAP

This stainless steel driveshaft is exactly what you need for your Nissan Skylin RB Engine into S Chassis Swap. Fits Nissan S13 or Nissan S14, with ABS option available.
We also offer the RB Engine Mount Kit for Nissan 240 to accompany this item.
 22131113
     
Product Pic
OPTIONS
$395.00
 ALUMINUM DRIVESHAFT FOR NISSAN 240 RB ENGINE SWAP

This Aluminum Driveshaft is perfect upgrade for Nissan Skyline RB Engine into S Chassis Swap. Fits Nissan S13 or Nissan S14, with ABS option available.
We also offer the RB Engine Mount Kit for Nissan 240 to accompany this item.
 22131120
     
Product Pic
OPTIONS
$398.99
 ALUMINUM DRIVESHAFT NISSAN 240SX WITH RB25

This Speedmaster one piece Aluminum Driveshaft for Nissan 240SX S13 S14 with RB25DET replaces the stock two piece driveshaft.
Order the Steel driveshaft for drifting and the Aluminum for drag and circuit racing.
 
FEATURES
For RB25DET swap.
•Direct Bolt in replacement. No modifications necessary
•3" Diameter Tubing. 6061-T6 Aluminum
•1310 series replaceable, high performance, American made ujoints
•High Speed Balanced as a complete assembly with rear flange and trans yoke attached before balancing

 22131121
     
Product Pic
OPTIONS
$352.99
 STEEL DRIVESHAFT NISSAN 240SX WITH RB25

This Speedmaster one piece Steel Driveshaft for Nissan 240SX S13 S14 with RB25DET replaces the stock two piece driveshaft.
Order the Steel driveshaft for drifting and the Aluminum for drag and circuit racing.
 
FEATURES
•For RB25DET swap.
•Direct Bolt in replacement. No modifications necessary
•3" Diameter X .083" Wall Thickness Tubing
•1310 series replaceable, high performance, American made ujoints
•High Speed Balanced as a complete assembly with rear flange and trans yoke attached before balancing

 22131122
     
Product Pic
OPTIONS
EXACT ENGINE MODEL
$699.00
 RB NISSAN 240SX WIRING HARNESS

This RB Engine Wiring Harness fits s13 or s14 Nissan 240sx
Contact SPEEDPARTS.biz to fully customize your race harness with all options.
 22131718
     
Product Pic
HOSE COVER
$80.00
 POWER STEERING LINE FOR NISSAN 240SX RB SERIES ENGINE SWAP
This custom power steering line is made specifically for Nissan 240sx with RB Series engine swap.
A complete high pressure OEM replacement power steering hose assembly. These -6 stainless steel assemblies are offered with or without a black hytrel cover to protect the lines and enhance the look for no extra charge.
 22131719
     
Product Pic
OPTIONS
$415.00
 ALUMINUM DRIVESHAFT FOR NISSAN 240 WITH 350Z TRANSMISSION SWAP

This Aluminum Driveshaft fits 350Z Transmission into S Chassis Swap. Perfect for Drift and Race Application. Fits Nissan S13 or Nissan S14, with ABS option available.

 22141120
     
Product Pic
OPTIONS
$375.00
 STAINLESS STEEL DRIVESHAFT FOR NISSAN 240 WITH 350Z TRANSMISSION SWAP

This Stainless Steel Driveshaft fits 350Z Transmission into S Chassis Swap. Perfect for Drift and Race Application. Fits Nissan S13 or Nissan S14, with ABS option available.
 22141121
     
Product Pic
OPTIONS
$422.99
 ALUMINUM DRIVESHAFT NISSAN 240SX WITH 6 SPEED 350Z TRANNY ONLY

This Speedmaster one piece Aluminum Driveshaft for Nissan 240SX S13 S14 with 350Z 6 speed transmission replaces the stock two piece driveshaft.
Order the Steel driveshaft for drifting and the Aluminum for drag and circuit racing.
 
FEATURES
For 350Z 6 speed transmission only swap.
•Direct Bolt in replacement. No modifications necessary
•3" Diameter Tubing. 6061-T6 Aluminum
•1310 series replaceable, high performance, American made ujoints
•High Speed Balanced as a complete assembly with rear flange and trans yoke attached before balancing

 22141122
     
Product Pic
OPTIONS
$422.99
 ALUMINUM DRIVESHAFT NISSAN 240SX WITH 6 SPEED 350Z TRANNY AND

This Speedmaster one piece Aluminum Driveshaft for Nissan 240SX S13 S14 with 350Z motor & transmission replaces the stock two piece driveshaft.
Order the Steel driveshaft for drifting and the Aluminum for drag and circuit racing.
 
FEATURES
For 350Z motor & 6 speed transmission swap.
•Direct Bolt in replacement. No modifications necessary
•3" Diameter Tubing. 6061-T6 Aluminum
•1310 series replaceable, high performance, American made ujoints
•High Speed Balanced as a complete assembly with rear flange and trans yoke attached before balancing

 22141123
     
Product Pic
OPTIONS
$397.99
 STEEL DRIVESHAFT NISSAN 240SX WITH 6 SPEED 350Z TRANNY ONLY

This Speedmaster one piece Steel Driveshaft for Nissan 240SX S13 S14 with 350Z 6 speed transmission replaces the stock two piece driveshaft.
Order the Steel driveshaft for drifting and the Aluminum for drag and circuit racing.
 
FEATURES
•For 350Z 6 speed transmission only swap.
•Direct Bolt in replacement. No modifications necessary
•3" Diameter X .083" Wall Thickness Tubing
•1310 series replaceable, high performance, American made ujoints
•High Speed Balanced as a complete assembly with rear flange and trans yoke attached before balancing

 22141124
     
Product Pic
OPTIONS
$397.99
 STEEL DRIVESHAFT NISSAN 240SX WITH 6 SPEED 350Z TRANNY AND MOT

This Speedmaster one piece Steel Driveshaft for Nissan 240SX S13 S14 with 350Z motor & transmission replaces the stock two piece driveshaft.
Order the Steel driveshaft for drifting and the Aluminum for drag and circuit racing.
 
FEATURES
•For 350Z motor & 6 speed transmission swap.
•Direct Bolt in replacement. No modifications necessary
•3" Diameter X .083" Wall Thickness Tubing
•1310 series replaceable, high performance, American made ujoints
•High Speed Balanced as a complete assembly with rear flange and trans yoke attached before balancing

 22141125
     
Product Pic
OPTIONS
$2200.00
 INFINITI G35 2JZ SWAP KIT

This Infiniti G35 2JZ Engine Swap Kit includes Motor Mounts, Cross Member, Trans Member, Drive Shaft, and Shifter Extension.

 22221710
     
Product Pic
$580.00
 INFINITI G35 ALUMINUM DRIVE SHAFT FOR 2JZ SWAP

Aluminum Drive Shaft for your Infiniti G35 2JZ Swap. Strong as steel 8 lbs lighter. Price shown is with kit purchases only. 5spd only, 6spd currently unavailable.

 22221110
     
Product Pic
$160.00
 INFINITI G35 2JZ SWAP POWER STEERING LINE

Custom 2JZ Power Steering Line for the 2JZ in your Infinti G35.

 22221711
     
Product Pic
OPTIONS
$2200.00
 NISSAN 350Z 2JZ SWAP KIT

Kit Includes Motor Mounts, Cross Member, Trans Member, Drive Shaft, and Shifter Extension.

 22231710
     
Product Pic
$580.00
 NISSAN 350Z ALUMINUM DRIVE SHAFT FOR 2JZ SWAP

Aluminum Drive Shaft for your Nissan 350Z 2JZ Swap. Strong as steel 8 lbs lighter. Price shown is with kit purchases only. 5spd only, 6spd currently unavailable.

 22231110
     
Product Pic
$45.00
 CUSTOM THROTTLE CABLE BRACKET FOR NISSAN 350Z 2JZ SWAP

This Custom Throttle Cable Bracket lets you keep your cruise control option along with your stock throttle cable for your Nissan 350Z 2JZ swap.

 22231711
     
Product Pic
$85.00
 POWER STEERING LINE FOR NISSAN 350Z 2JZ SWAP

Custom 2JZ Power Steering Line for the 2JZ in your Nissan 350Z.

 22231712
     
Product Pic
OPTIONS
$2100.00
 MAZDA RX7 FC 2JZ SWAP KIT

This Mazda RX7 FC 2JZ Engine Swap Kit includes Front Cross Member, Transmission Cross Member, Drive Shaft, Motor Mounts, Motor Mount Brackets, and Shifter Extension. This kit requires a mid sump from a Toyota Supra or SE300. All parts are CNC Laser Cut.

 25111710
     
Product Pic
$580.00
 MAZDA RX7 FC ALUMINUM DRIVE SHAFT FOR 2JZ SWAP

Aluminum Drive Shaft for your Mazda RX7 FC 2JZ Swap. Strong as steel 8 lbs lighter. Price shown is with kit purchases only. 5spd only, 6spd currently unavailable.

 25111110
     
Product Pic
$160.00
 POWER STEERING LINE FOR MAZDA RX7 FC 2JZ SWAP

Custom 2JZ Power Steering Line for the 2JZ in your Mazda RX7 FC.

 25111711
     
Product Pic
OPTIONS
$2500.00
 MAZDA RX7 FD 2JZ SWAP KIT

This Mazda RX7 FD 2JZ Engine Swap Kit includes Front Cross Member, Transmission Cross Member, Drive Shaft, Motor Mounts, Motor Mount Brackets, and Shifter Extension. This kit requires a mid sump from a Toyota Supra or SE300. All parts are CNC Laser Cut.

 25111712
     
Product Pic
$580.00
 MAZDA RX7 FD ALUMINUM DRIVE SHAFT FOR 2JZ SWAP

Aluminum Drive Shaft for your Mazda RX7 FD 2JZ Swap. Strong as steel 8 lbs lighter. Price shown is with kit purchases only. 5spd only, 6spd currently unavailable.

 25111111
     
Product Pic
OPTIONS
MODEL
$337.99
 SCION FRS / SUBARU BRZ 2JZ MOUNT KIT

NOW AVAILABLE
New Scion FR-S and Subaru BRZ 2JZ GTE engine swap mount kit.
Convert your FR-S into an unstoppable 2JZ beast.
Strong and effective formed steel motor bracket and urethane motor mount. Urethane motor mounts available in two heights for 3/4 in cross member clearance and 1/4 in clearance depending on if steering rack swaps or other cross member mods are done. The taller urethane mounts are standard for the 3/4 in crossmember clearance, please specify if you want the lower mounts.

Use with our Rocket Bunny FRS Kit for the ultimate Tuner experience!
 27101710