Speedparts.biz Logo Speedparts.biz Logo Speedparts.biz Logo Speedparts.biz Logo Speedparts.biz Logo Speedparts.biz Logo


OFFICIAL 2015 DEALER:

NEO
ROCKET BUNNY SARTO RACING BMW E36
Rocket Bunny Distributor
Canton Racing Distributor
Braille Battery Distributor
RAYS ENGINEERING VOLK RACING DEALER
The listed shipping rate only applies to the lower 48 contiguous states. Additional shipping may be charged for shipping outside the United States. No returns on special order products. Returns on products that are eligible for return will be subject to an additonal 30% restocking fee plus shipping.
CALL 502.553.7822 TO PLACE AN ORDER
      9 results displayed for SAFETY & INTERIOR  
        PART#
Product Pic
OPTIONS
$199.00
 DRIFT II BOLT / SNAP

Takata Racing cult status for the street! Available in traditional TAKATA Green and also in Black!
This belt manufactured in accordance to the European Standard ECE-R 16.04 and Federal Motor Vehicle Safety Standard (FMVSS) 209. It is a legal seat belt for use in street cars in all US states with mandatory seat belt laws. The belt features a center push button release buckle and our shoulder belt asm system to prevent submarining. 2" shoulder belts and 2" lap belts with Pull-up adjusters with comfort padding.
The Bolt-On version generally bolts to the existing factory mounting points for the front lap belts. The shoulder belts generally mount either to the rear lap belt mounting points OR they can be wrapped directly to a roll-cage or harness bar. The lap belt Bolt-On attachments brackets are sewn into the lap belts. The shoulder belt attachment brackets can be removed allowing you to wrap the shoulder belts to a harnessbar or rollbar using the 3-bar adjusters provided.
The lap belt Snap-On attachments brackets are sewn into the lap belts. The shoulder belt attachment brackets can be removed allowing you to wrap the shoulder belts to a harnessbar or rollbar using the 3-bar adjusters provided. The Snap-On version is designed to be attached to eye bolts at the lap belts.
Takata Quality – made by Takata Racing (Europe) in Germany
(Pictured Left Bolt-On. Pictured Right Snap-On)


 11221313
     
Product Pic
OPTIONS
$305.00
 DRIFT III BOLT / SNAP

Takata Racing cult status for the street! Available in traditional TAKATA Green and also in Black!
This belt manufactured in accordance to the European Standard ECE-R 16.04 and Federal Motor Vehicle Safety Standard (FMVSS) 209. It is a legal seat belt for use in street cars in all US states with mandatory seat belt laws. The belt features a center push button release buckle and our shoulder belt asm system to prevent submarining. 3" shoulder belts and 2" lap belts with comfort padding.
The Bolt-On version generally bolts to the existing factory mounting points for the front lap belts. The shoulder belts generally mount either to the rear lap belt mounting points OR they can be wrapped directly to a roll-cage or harness bar. The lap belt Bolt-On attachments brackets are sewn into the lap belts. The shoulder belt attachment brackets can be removed allowing you to wrap the shoulder belts to a harnessbar or rollbar using the 3-bar adjusters provided.
The lap belt Snap-On attachments brackets are sewn into the lap belts. The shoulder belt attachment brackets can be removed allowing you to wrap the shoulder belts to a harnessbar or rollbar using the 3-bar adjusters provided. The Snap-On version is designed to be attached to eye bolts at the lap belts.
Takata Quality – made by Takata Racing (Europe) in Germany
(Pictured Left Bolt-On. Pictured Right Snap-On)


 11221314
     
Product Pic
OPTIONS
$375.00
 RACE 4 BOLT / SNAP

The RACE 4 is the benchmark harness for Track Day/Drift/Show cars. This true racing harness comes with FIA approval, and the exclusive TAKATA aluminum multi-point release cam-lock buckle. Additional features include asm system to prevent submarining, 3" shoulder belts, and 2" lap belts.
The Bolt-On version features specialized bendable stainless steel bolt-on brackets (see image) designed to bolt to the stock vehicle seat belt mounting points along with your factory seat belts. The brackets can be pre-bent to optimize installation and to maintain the proper load path of the seat belt under load.
The lap belt Bolt-On attachment brackets are sewn into the lap belts. The shoulder belt attachment brackets are wrapped in and can be removed allowing you to wrap the shoulder belts to a harnessbar or rollbar using the 3-bar adjusters provided.
The lap belt Snap-On attachment brackets are sewn into the lap belts. The shoulder belt attachment brackets are wrapped in and can be removed allowing you to wrap the shoulder belts to a harnessbar or rollbar using the 3-bar adjusters provided.
Takata Quality – made by Takata Racing (Europe) in Germany
(Pictured Left Bolt-On. Pictured Right Snap-On)


 11221315
     
Product Pic
OPTIONS
$425.00
 RACE 6 / RACE 6 HANS
     

The RACE 6 is the premium harness for your competition vehicle. This 6 point harness is FIA approved with T-Bar sub-strap, 3" shoulder belts, 2" lap belts and the exclusive TAKATA aluminum multi-point release cam-lock buckle.
The lap belts come with pull-down adjusters (pull away from the cam- lock) and Snap-On brackets for mounting to an eyebolt. The sub-straps are mounted with Snap-On brackets as well. The Snap-On brackets on both the lap belt and sub-straps are wrapped in allowing you to properly set the lengths of the belts and/or to change to a Bolt-On configuration by purchasing an additional Bolt-On kit.
Shoulder belts come with a 3-bar adjuster for wrap mounting to a rollbar or harnessbar. Snap-On or Bolt-On brackets can be purchased separately if you prefer a snap or bolt mount for the shoulder belts.
The RACE 6 HANS is the same as the RACE 6 but with 3" to 2" shoulder belts that are compatible with the HANS device and other head and neck restraints. The lower section of the shoulder belt, including the adjuster, is 3" while the upper section of the shoulder belt, where it passes over the head and neck restraint, is 2" fitting perfectly on the friction surface of your HANS device. Standard 3" shoulder belts will work with HANS®, but the 2"/3" belts give you a better fit and allow you to optimize the installation angles behind the seat. There is no difference in the strength of the 2" webbing compared to the 3" webbing.
Takata Quality – made by Takata Racing (Europe) in Germany
(Pictured Left Race 6. Pictured Right Race 6 Hans;


 11221316
     
Product Pic
COLORS
$385.00
 RACETECH PRO 6-POINT HANS HARNESS


Quality 6-point harness with 2 in. shoulder straps over the HANS device. This harness is FIA approved, but only when used correctly in conjunction with a HANS device. Features 2 in. lap straps and 2 in. crutch straps, which lock in via a T bar to the lightweight cam-lock. Includes snap-hooks, eye-bolts and instructions for mounting in your vehicle. Snap-hooks can be removed to allow wrap-style fixing to your rollcage or harness bar.
Weighs 2.9kg. Featuring light-weight alloy adjusters.
 

 11221317
     
Product Pic
COLORS
$260.00
 RACETECH PRO 6-POINT HARNESS


A quality 6-point harness with wide 3 in. shoulder straps and 2 in. lap straps with loader spreader to pelvis. 2 in. crutch straps lock in via a T bar to the lightweight cam-lock. Features velcro on the lap straps for fixing the belts to your seat fabric when the harness is not in use, allowing easy entry and exit from the vehicle. Includes snap-hooks, eye-bolts and instructions for mounting in your vehicle. Snap-hooks can be removed to allow wrap-style fixing to your rollcage or harness bar.
Weighs 2.8kg.
 

 11221318
     
Product Pic
OPTIONS
$260.00
 SPARCO 4 POINT COMPETITION HARNESS
     

Sparco’s full line of harnesses works in unity with our competition seats. Crafted from high-quality fabric and fitted with durable fasteners, each harness restrains the body for added safety and protection. Our 4-point harness is comprised of a 2-inch lap belt and 3- inch shoulder straps. Each belt attaches to the frame using snap-on fixings. A high-quality aluminum buckle with built-in load spreader waist pad makes it easy to buckle up. Available in black, blue and red.

 

 11221310
     
Product Pic
OPTIONS
$350.00
 SPARCO 6 POINT COMPETITION HARNESS
   

Sparco’s full line of harnesses works in unity with our competition seats. Crafted from high-quality fabric and fitted with durable fasteners, each harness restrains the body for added safety and protection. Our 6-point harness features 3-inch lap and shoulder straps that attach in the center using an aircraft-quality quick-release buckle with integrated anti-submarine belts. The lightweight aluminum adjusters allow for smooth, quick adjustments and perfect clamping. Each belt attaches to the frame using snap-on fixings. Available in two styles: pull up and pull down in three colors each: black, blue and red.
Both styles are FIA approved; the pull-down version is also SFI approved.

 

 11221311
     
Product Pic
OPTIONS
$375.00
 SPARCO 6 POINT HANS COMPETITION HARNESS
     

Sparco’s full line of harnesses works in unity with our competition seats. Crafted from high-quality fabric and fitted with durable fasteners, each harness restrains the body for added safety and protection. Our 6-point Hans-compatible harness features 3-inch lap straps and shoulder straps that taper from 3 inches to 2 inches. This tapered design allows for the integration of a Hans device. Each strap attaches in the center using an aircraft-quality quick-release buckle with integrated anti-submarine belts. The lightweight aluminum adjusters allow for smooth, quick adjustments and perfect clamping. Each belt attaches to the frame using snap-on fixings. Available three colors: black, blue and red.
This harness is FIA approved.

 

 11221312